Click here to buy UHMWPE Sheet.

UHMWPE Datasheet:

Properties	Unit	Method
Density	g/cm3	527 / D 792	0.93
Tensile strength at yield	MPa	527 / D 638	17
Tensile strength at break	MPa	527 / D 638	40
Elongation at break	%	527 / D 638	>50
Modulus of elasticity in tension	MPa	527 / D 638	650
Modulus of elasticity in flexture	MPa	178 / D 790	800
Ball indentation hardness	MPa	2039/1	35
Impact Strength	kJ/m2	179 / D 256	No br.
Creep rupture strength after 1000 hrs with static load	MPa
Time yield limit for 1% elongation after 1000 hrs	MPa
Coefficient of friction against hardened and ground steel p=0,05 N/mm2, v = 0,6 m/s	-		0.29
Wear conditions as above	um/km
Crystalline melting point	°C	DIN 53 736	plus 135
Glass transition temperature	°C	DIN 53 736
Heat distortion temperature Method A Method B	°C °C	R 75 R 75	42 ~70
Max. service temperature short term long term	°C °C		plus 120 plus 90
Coefficient of thermal conductivity	W/(m K)		0.41
Specific Heat	J/(g K)		1.84
Coefficient of thermal expansion	10-5/K	DIN 53 483 / D 696	20
Dielectric constant at 105 Hz		DIN 53 483	3
Dielectric loss factor at 105 Hz		DIN 53 483
Specific volume resistance	Ω cm	DIN 60093	1014
Surface resistance	Ω	DIN 60093	1012
Dielectric Strength 1mm	kV/mm	ASTM 149	45
Tracking Resistance		53 480	KA 3c, KB>600,KC>600
Moisture absorption: Equilibrium in standard atmosphere (plus 23°C / 50% relative humidity)	%	62	0.01
Water absorption at saturation at plus 23°C	%	62	0.02
Resistance to hot water, washing soda			resistant
Flammability according to UL standard 94			HB
Resistance to weathering			Natural: not resistant Black: resistant